Ask the question you have about the APC Back-UPS 700 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other APC Back-UPS 700 owners to provide you with a good answer. Back-UPS ES 750 User’s Guide 1 2 3 Connect Battery Power On and Install Software Surge Protection These outlets provide full-time protection from surges even if the Back-UPS ES is switched OFF. Plug your printer, fax machine, scanner, or other peripherals that do not need battery power into these outlets. Place the Back-UPS ES to avoid. RefurbUPS is the nation's most trusted source today for Performance Guaranteed power protection solutions. We supply more than 10,000 customers nationwide including today's leading corporations, retailers, government, and educational institutions.
Sold by: | |
® | http://www.TWAcomm.com |
Toll Free: (877) 892-2666 |
Back-UPS®ES 350/500
User’s Guide
2 Slide the battery | |
compartment cover | |
completely off of | |
the Back-UPS ES. | Connect |
Equipment |
Place the Back-UPS ES to avoid: | ||||
Battery Back-up plus | Surge Protection | 2 | - Direct sunlight | |
These outlets are powered whenever the Back-UPS ES is | - Excessive heat | |||
- Excessive humidity or contact with fluids | ||||
switched ON. During a power outage or other utility problems | ||||
(brownouts, over-voltages), these outlets will be powered for a | Connect FAX/Modem/Phone | Plug the Back-UPS ES power cord directly | ||
limited time by the Back-UPS ES. Plug your computer, monitor, | Back-UPS ES protects a single | into a wall outlet; not a surge protector or | ||
and one other> Connect Computer Cable | ||||
UPS ES as shown. | The supplied cable and software provide | |||
automatic file saving and shutdown of the | ||||
operating system in the case of a sustained | ||||
Battery Backup plus Surge Protection | power outage. | |||
Wall Outlet | Connect the cable to the Data Port of the Back- | |||
Surge Protection | UPS ES. Connect the other end of the cable to | |||
the USB port on your computer. The software will | ||||
automatically find the USB Port of your | ||||
P o w e r O n | computer. | |||
Modem/Phone/Fax | ||||
Surge Protection | Circuit | |||
Breaker | ||||
These outlets provide full-time protection from surges even if | Computer | Cord | UPSPower | |
On Indicator | ||||
AC Line | ||||
the Back-UPS ES is switched OFF. Plug your printer, fax | USB Port | Building Wiring | PowerOn | |
machine, scanner, or other peripherals that do not need | ||||
FaultIndicator | ||||
battery power into these outlets. | Power | |||
Switch | ||||
Status Indications
3Power On and
Install Software
Press the ON/OFF switch to power the unit
ON.
A single short beep and the green “Power On” indicator confirms that Back-UPS ES is on and ready to provide protection.
The Back-UPS ES should charge for at least 16 hours to ensure sufficient runtime. The unit is being charged whenever it is connected to utility power, whether the unit is turned ON or OFF.
If the red Building Wiring Fault indicator (located on the end near the power cord) is lit, your building wiring presents a shock hazard that should be corrected by a qualified electrician.
Install the PowerChute Personal® Edition software
Place the PowerChute Personal Edition CD-
ROM into your computer and follow the
The Back-UPS ES indicates operating status using a combination of visual and audible indicators.
Status | Visual Indications | Audible Indication | Alarm Terminates |
When | |||
On Line - UPS is supplying conditioned | Power On LED - ON | None | n/a |
utility power to the load | |||
On Battery - UPS is supplying battery | Power On LED - ON | Beeping 4 times | UPS transfers back to |
power to the load connected to the | (off during beep) | every 30 seconds | On Line operation, or |
Battery outlets | when UPS is turned | ||
off. | |||
Low Battery Warning - UPS is supplying | Power On LED - | Rapid beeping (one | UPS transfers back to |
battery power to the load connected to | Flashing | second intervals) | On Line operation, or |
the Battery outlets and the battery is near | when UPS is turned | ||
exhuastion | off. | ||
Replace Battery - Battery needs to be | Power On LED - | Constant tone | UPS turned off with |
checked and/or replaced, or battery is not | Flashing | the power switch. | |
connected | |||
Overload Shutdown - During On Battery | Power On LED - OFF | Constant tone | UPS turned off with |
operation a battery power supplied outlet | the power switch. | ||
overload was detected. | |||
Sleep Mode - During On Battery | Power On LED - OFF | Beeping once every | UPS transfers back to |
operation the battery power has been | 4 seconds | On Line operation, or | |
completely exhausted and the UPS is | when UPS is turned | ||
waiting for utility power to return to | off. | ||
normal. | |||
Building Wiring Fault - Your building | Building Wiring Fault | None | UPS is unplugged, or |
wiring presents a shock hazard that | LED (red) - ON | plugged into a | |
should be corrected by a licensed | properly wired outlet. | ||
electrician. |
See the Troubleshooting section for additional assistance.
990-9197 Revision 1 11/01 Copyright © 2001 American Power Conversion Corp. | APC, Back-UPS and PowerChute are registered trademarks of American Power Conversion Corp. |
All other trademarks are property of their respective owners.
Troubleshooting | Use the table below to solve minor Back-UPS ES installation or operation problems. Consult APC Online Technical Support or call APC | ||
Technical Support for assistance with problems that cannot be resolved using the table below: | |||
Problem | Probable Cause | Solution | |
Back-UPS ES will not turn on. | Battery is disconnected and utility power is not available at | Connect the battery (see Connect Battery) and ensure power is available at the wall | |
the wall outlet. | outlet. | ||
No power available at the Surge Protection | Surge Protection outlets have been overloaded. | Reduce the amount of equipment plugged into Surge Protection outlets. | |
outlets. | |||
Utility power not available at the wall outlet. | Ensure that the fuse or circuit breaker for the outlet is not tripped, and that the wall | ||
switch controlling the outlet (if any) is in the ON position. | |||
Connected equipment loses power. | Equipment is connected to the “Surge Protection” outlets. | Ensure that the equipment you want to stay powered during a power failure is | |
plugged into the “Battery Backup plus Surge Protection” outlets and NOT the “Surge | |||
Protection” outlets. | |||
The Back-UPS ES is overloaded. | Make sure that the equipment plugged into the outlets of the unit are not overloading | ||
the capacity of the unit. Try removing some of the equipment and see if the problem | |||
continues. | |||
PowerChute Personal Edition software has performed a | The Back-UPS ES is operating normally. | ||
shutdown due to a power failure. | |||
The Back-UPS ES has exhausted its available battery | The Back-UPS ES can only operate on battery power for a limited amount of time. | ||
power. | The unit will eventually turn off when the available battery power has been used. | ||
Allow the unit to recharge for 16 hours before continuing use of the unit. | |||
Connected equipment does not accept the step- | The output waveform is designed for computers and computer-related equipment. It | ||
approximated sine waveform the Back-UPS ES. | is not designed for use with motor-type equipment. | ||
The Back-UPS ES may require service. | Contact APC Technical Support for further troubleshooting. | ||
The Power On indicator is lit and the Back- | The Back-UPS ES is using battery. | The Back-UPS ES is operating normally and using battery power. Once On Battery, | |
UPS ES is beeping four times every 30 | you should save your current work, power down your equipment, and turn the unit | ||
seconds. | OFF. Once normal power is restored, you may turn the unit back ON and power | ||
your equipment. | |||
The Power On indicator flashes once per | Battery capacity is low (about 2 minutes of use remaining). | The Back-UPS ES is about to shut off due to a low battery charge condition! When | |
second and the Back-UPS ES beeps once | the unit beeps once every second, the battery has about 2 minutes of power | ||
per second at the same time. | remaining. Immediately power down your computer and turn the unit OFF. When | ||
normal power returns, the unit will recharge the battery. | |||
Building Wiring Fault indicator is lit. | Your building wiring presents a shock hazard. Using the | Call a qualified electrician for service. | |
Back-UPS with this condition will void the warranty. | |||
Inadequate runtime. | The battery is not fully charged. | Allow the unit to charge by leaving it plugged into the wall at least 16 hours. | |
Battery is near the end of useful life. | As a battery ages, the amount of runtime available will decrease. You can replace | ||
the battery by ordering one at www.apc.com. Batteries also age prematurely if the | |||
Back-UPS ES is placed near excessive heat. | |||
Specifications
Model | BE350U | BE500U | ||||||
Input | Voltage | 120 Vrms Nominal | ||||||
Frequency | 47 - 63 Hz | |||||||
Brownout Transfer | 96 Vrms, typical | |||||||
Over-voltage Transfer | 136 Vrms, typical | |||||||
Output | UPS Capacity (3 outlets) | 350 VA / 200 W | 500 VA / 300 W | |||||
Surge Capacity (6 outlets) | 12 Amps (including UPS output) | |||||||
Voltage | 115 Vrms + 8% | |||||||
On Battery | (step-approximated sine wave) | |||||||
Frequency - On Battery | 50-60 Hz + 1 Hz | |||||||
Transfer Time | 5 ms typical, 8 ms maximum | |||||||
Protection and Filter | AC Surge Protection | Full time, 375 joules | ||||||
Telephone Surge Protection | Single line (2-wire) | |||||||
EMI/RFI Filter | Full time | |||||||
AC Input | Resettable circuit breaker | |||||||
Battery | Type | Sealed, maintenance-free lead acid | ||||||
Average Life | 2 - 4 years depending on the number of discharge | |||||||
cycles and environmental temperature | ||||||||
Physical | Net Weight | 9.20 lb. (4.18 kg.) | 13.25 lb. (6.02 kg.) | |||||
Size | 3.3” (H) x 10.9” (W) x 6.9” (D) | |||||||
(8.3 x 27.8 x 17.5 cm) | ||||||||
Operating Temperature | +32oF to 104oF (0oC to 40 oC) | |||||||
Storage Temperature | o | F to 113 | o | o | o | |||
+5 | F (-15 C to 45 C) | |||||||
Operating Relative Humidity | 0 to 95% non-condensing | |||||||
Operating Elevation | 0 to 10,000 ft (0 to 3,000m) | |||||||
Safety/Regulatory | Safety Approvals | UL 1778 listed, cUL certified per | ||||||
CSA standard C22.2 No. 107.1 | ||||||||
EMC Compliance | FCC part 68, FCC part 15 Class B | |||||||
Notice: This device complies with part 15 of | ||||||||
the FCC rules. Operation is subject to the | ||||||||
following two conditions: (1) This device may | ||||||||
not cause harmful interference, and (2) This | ||||||||
device must accept any interference received, | ||||||||
including interference that may cause | ||||||||
undesired operation. | ||||||||
Sold by: | ||||||||
http://www.TWAcomm.com | ||||||||
Toll Free: (877) 892-2666 | ||||||||
Order Replacement Battery
Replace with an APC qualified battery. Replacement batteries can be ordered from www.apc.com (valid credit card required). Have your Back-UPS ES model number available when ordering. Your model number can be found on the bottom of the unit.
Warranty
The standard warranty is 2 years from the date of purchase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. Customers who must have the original unit back due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC Technical Support. APC will ship the replacement unit once the defective unit is received by the repair department or cross-ship upon the provision of a valid credit card number. The customer pays for shipping to APC, and APC pays ground freight transportation costs back to the customer.
Service
Please DO NOT RETURN Back-UPS ES to the place of purchase under any circumstances.
1.Consult the Troubleshooting section to eliminate common problems.
2.Verify the battery is connected (see Connect Battery) and that the Circuit Breaker is not tripped (see Troubleshooting section).
If you still have problems or questions, please contact APC via the internet or at one of the phone numbers listed below.
3.Before contacting APC, please be sure to record the date purchased, UPS model, and serial number (on bottom of unit).
4.Be prepared to troubleshoot the problem over the telephone with a Technical Support Representative. If this is not successful, the representative will issue a Return Material Authorization Number (RMA#) and a shipping address.
Pack the unit in its original packaging. If the original packaging is not available, ask APC Technical Support about obtaining a new set. Pack the unit properly to avoid damage in transit. Never use foam beads for packaging. Damage sustained in transit is not covered under warranty (insuring the package for full value is recommended).
5.Write the RMA# on the outside of the package.
6.Return the unit by insured carrier to the address given to you by APC Technical Support.
APC Contact Information
Online Technical Support . . . . . http://support.apc.com Web Site . . . . . . . . . . . . . . . . . . . www.apc.com USA/Canada . . . . . . . . . . . . . . . 1.800.800.4272
Mexico . . . . . . . . . . . . . . . . . . . . . +52.292.0253 / 52.292.0255 Brazil . . . . . . . . . . . . . . . . . . . . . . . +0800.12.72.1
Worldwide . . . . . . . . . . . . . . . . . +1.401.789.5735
Back-UPS ES 350/500
User’s Guide
1
2
3
Connect Battery
Connect
Equipment
Power On and
Install Software
990-9197 Revision 1 11/01 Copyright © 2001 American Power Conversion Corp.
All other trademarks are property of their respective owners.
The Back-UPS ES is shipped with one battery wire disconnected in compliance with Department of Transportation (DOT) regulations. The Back-UPS ES
will not operate until the wire is connected to the touch safe battery terminal.
NOTE: Small sparks may occur during battery connection. This is normal.
1
2
4
TURN the Back-UPS ES over and
remove the battery compartment
cover screw using a flat blade or
phillips-head screwdriver.
Slide the battery
compartment cover
completely off of
the Back-UPS ES.
Replace the battery,
battery compartment
cover and cover
retaining screw.
Surge Protection
These outlets provide full-time protection from surges even if
the Back-UPS ES is switched OFF. Plug your printer, fax
machine, scanner, or other peripherals that do not need
battery power into these outlets.
Battery Back-up
plus Surge Protection
These outlets are powered whenever the Back-UPS ES is
switched ON. During a power outage or other utility problems
(brownouts, over-voltages), these outlets will be powered for a
limited time by the Back-UPS ES. Plug your computer, monitor,
and one other data-sensitive device (external disk or tape
drive) into these outlets.
Connect FAX/Modem/Phone
Back-UPS ES protects a single
line (2-wire) fax, modem or
phone from surges when it is
connected through the Back-
UPS ES as shown.
Place the Back-UPS ES to avoid:
- Direct sunlight
- Excessive heat
- Excessive humidity or contact with fluids
Plug the Back-UPS ES power cord directly
into a wall outlet; not a surge protector or
power strip.
Connect Computer Cable
The supplied cable and software provide
automatic file saving and shutdown of the
operating system in the case of a sustained
power outage.
Connect the cable to the Data Port of the Back-
UPS ES. Connect the other end of the cable to
the USB port on your computer. The software will
automatically find the USB Port of your
computer.
Press the ON/OFF switch to power the unit
ON.
A single short beep and the green “Power On”
indicator confirms that Back-UPS ES is on and
ready to provide protection.
The Back-UPS ES should charge for at least
16 hours to ensure sufficient runtime. The unit
is being charged whenever it is connected to
utility power, whether the unit is turned ON or
OFF.
If the red Building Wiring Fault indicator
(located on the end near the power cord) is lit,
your building wiring presents a shock hazard
that should be corrected by a qualified
electrician.
Install the PowerChute Personal
®
Edition
software
Place the PowerChute Personal Edition CD-
ROM into your computer and follow the
installation instructions on the screen.
3
LIFT the battery out of the compartment and connect the
black wire to the battery terminal.
www.apc.com
®
P o w e r O n
Battery Backup
plus Surge Protection
Wall Outlet
Modem/Phone/Fax
Computer
USB Port
Apc Back-ups Es 700va User Manual 2017
Surge Protection
Back-UPS ES 500
Back-UPS ES 350
APC, Back-UPS and PowerChute are registered trademarks of American Power Conversion Corp.
The Back-UPS ES indicates operating status using a combination of visual and audible indicators.
Status
Visual Indications
Audible Indication
Alarm Terminates
When
On Line - UPS is supplying conditioned
utility power to the load
Power On LED - ON
None
n/a
On Battery - UPS is supplying battery
power to the load connected to the
Battery outlets
Power On LED - ON
(off during beep)
Beeping 4 times
every 30 seconds
UPS transfers back to
On Line operation, or
when UPS is turned
off.
Low Battery Warning - UPS is supplying
battery power to the load connected to
the Battery outlets and the battery is near
exhuastion
Power On LED -
Flashing
Rapid beeping (one
second intervals)
UPS transfers back to
On Line operation, or
when UPS is turned
off.
Replace Battery - Battery needs to be
checked and/or replaced, or battery is not
connected
Power On LED -
Flashing
Constant tone
UPS turned off with
the power switch.
Overload Shutdown - During On Battery
operation a battery power supplied outlet
overload was detected.
Power On LED - OFF
Constant tone
UPS turned off with
the power switch.
Sleep Mode - During On Battery
operation the battery power has been
completely exhausted and the UPS is
waiting for utility power to return to
normal.
Power On LED - OFF
Beeping once every
4 seconds
UPS transfers back to
On Line operation, or
when UPS is turned
off.
Building Wiring Fault - Your building
wiring presents a shock hazard that
should be corrected by a licensed
electrician.
Building Wiring Fault
LED (red) - ON
None
UPS is unplugged, or
plugged into a
properly wired outlet.
Status Indications
Power On
Circuit
Breaker
AC Line
Cord
Building Wiring
Fault Indicator
UPS Power
On Indicator
Power
Switch
®
See the Troubleshooting section for additional assistance.
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 892-2666