1746 NI8 PDF

• Allen Bradley 1746-ni8 User Manual Download
• Allen Bradley 1746-ni8 User Manual Free
• Allen Bradley 1746 Manual

• If you do not, contact your local Allen-Bradley representative for the proper training before using this product. This manual is a learning and reference guide for the 1746-NI8 Analog Input Module. It contains the information you need to install, wire, and configure the module. It also provides diagnostic and troubleshooting information,.
• The 1746-NI8, NI16I and NI16V modules are high-density, 8- and 16-channel input modules best suited for demanding process cont rol applications with a large number of analog input signals. These modules provides faster, more accurate measurement and are channel-to-channel configurable for added application flexibility.
• About 1746-NI8. The Allen-Bradley 1746-NI8 is an analog single-slot I/O module for the SLC 500 system. It is a high-resolution analog input module with high-density components and it can be configured by the user with software.
• Rockwell Automation 1746-NI8 SLC 500 Analog Input Modules User Manual User Manual. Inside cover. Rockwell Automation Equipment. Allen-Bradley does not assume.
• Find the Allen Bradley 1746-NI8-USER-MANUAL at PDF Supply. The new 1746-NI8-USER-MANUAL is available online and will ship today. Download the technical manual for.

Find the Allen Bradley 1746-NI8 Find product images, at PDF Supply. The new 1746-NI8 can be purchased online and your order will ship today. Download the technical manual for wiring and installation instructions.

Allen-Bradley NI8 I/O Module, Analog, 8 Channel Input, 24VDC. Allen- Bradley NI8 I/O Module, Mfr Number: NI8. Rexel Part Number: The NI8 analog I/O module contains 8 inputs (-+10V DC, -+20mA). The backplane current load of NI8 is mA at 5V DC or mA at 24V DC. NI8 Low Price Guarantee! Allen Bradley – Rockwell Automation SLC ALBNI8 New, Repair and Reman Parts. Ships Fast and 2 YR Warranty.

When the fault conditions are corrected, the channel status LED will stop blinking and resume steady illumination.

If you clear 0 a channel enable bit 11 all channel status information is reset. When assessing an existing program, all analog inputs are set up as documented, but they use different raw values when scaling e.

People who bought this also bought. See details for additional description. Some of the channels are scaled to and others are scaled to Off Channel Not Enabled No action required.

I did not see it in the NI8 user manual or installation manual. A failure of any channel diagnostic test causes the faulted channel status LED to blink.

Allen Bradley 1746-ni8 User Manual Download

Posted 6 Aug Eight of these are channel status LEDs numbered to correspond to each of the input channels, and one is a module status LED.

On Channel Enabled No action required. How would I know the scaling format for the analog values coming from the SN module. Started by gromit5 Aug Be the first to write a review. See all 7 brand new listings. The channels are set up as follows: The NI8 module has an 8-Channel input with an isolated backplane.

Allen-Bradley 1746-NI8 (1746-NI8) Analog Input Module

It performs continuous autocalibration and has an isolation voltage of Volts DC and Volts AC, tested for 60 seconds. Off Module Fault Cycle power. Start, or chapter 6, Ladder Logic Configuration.

Posted 5 Aug This makes it clear. D Micro Programmable Logic Controllers. Any Condition Any Condition. On Proper Operation No action required.

NI8 | Allen Bradley PLC – Rockwell Automation SLC | ALBNI8

Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail 174, such as an unprinted box or plastic bag. It has a maximum backplane power consumption of 1 Watt at 5 Volts DC and 2. It is a high-resolution analog input module with high-density components and it can be configured by the user with software.

This item doesn’t belong on this page. Posted 8 Aug No ratings or reviews yet.

If you clear 0 a channel enable bit 11 all channel. SLC Module Type: Can this module be purchased with a warranty?

Because of the variety of uses for the products described in this
publication, those responsible for the application and use of this
control equipment must satisfy themselves that all necessary steps
have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws,
regulations, codes and standards.

The illustrations, charts, sample programs and layout examples
shown in this guide are intended solely for purposes of example.
Since there are many variables and requirements associated with any
particular installation, Allen-Bradley does not assume responsibility
or liability (to include intellectual property liability) for actual use
based upon the examples shown in this publication.

Allen-Bradley publication SGI-1.1, Safety Guidelines for the
Application, Installation, and Maintenance of Solid-State Control
(available from your local Allen-Bradley office), describes some
important differences between solid-state equipment and
electromechanical devices that should be taken into consideration
when applying products such as those described in this publication.

Reproduction of the contents of this copyrighted publication, in
whole or in part, without written permission of Allen-Bradley
Company, Inc., is prohibited.

Throughout this manual we use notes to make you aware of safety
considerations:

!

ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage or economic loss.

Attention statements help you to:

Allen Bradley 1746-ni8 User Manual Free

•

identify a hazard

•

Allen Bradley 1746 Manual

avoid the hazard

•

recognize the consequences

Important: Identifies information that is critical for successful

application and understanding of the product.

SLC, SLC 500, SLC 5/02, SLC 5/03, SLC 5/04, and MicroLogix are trademarks of Allen-Bradley Company, Inc.
A.I. Series and RSLogix 500 are trademarks of Rockwell Software, Inc.

Important User

Information